All prices are in NZ dollars
(that is the only currency we sell in). The converter below is for information only.

Pro-Forme Advanced Hollowing Kit

SKU:
Ex factory price in NZ dollars excluding GST
NZ$539.00
NZ$539.00
Unavailable

The ultimate combination for the serious hollow form turner. Includes the addition of the slight bent head for wood removal from the shoulder and down the sides.


Widely recognized as the best hollowing tool available.


"Make shavings, not dust".




  • Easiest to sharpen, adjust and use
  • Unlike other tools you don't need to keep adjusting the cutter
  • Designed for cross and end grain scenarios
  • User guide supplied and support videos available on You Tube.


The Woodcut Pro-Forme hollowing system includes a hardened M2 high speed steel cutter that is open on the side to prevent clogging, which is common with other end grain/hollowing tools. The adjustable safety gauge determines the depth of cut and prevents dig-ins. Each cutter is both re-sharpenable using a diamond hone and replaceable to ensure a long working life from these tools.


The straight shaft is designed to produce the opening and remove the wood down the sides and across the bottom of the vessel. The slight and bent shafts are designed for working under the shoulder of the workpiece through a smaller opening or with a reverse curve shape that limits the approach of the straight tool. 


The 20" (508mm) spigot handle has a comfortable cushioned grip for long periods at the lathe and if required two handles can be fitted together for extra length if required.


The Woodcut Pro-Forme is designed to hollow both side and end grain on green or dry wood. However, for an optimal hollowing experience, Woodcut Tools recommends the cutter is regularly sharpened and green wood is used. For guidelines on how to sharpen the cutter please refer to page 6 of the User Manual available.


All Pro-Forme tools feature a heavy duty 5/8" diameter shaft that will reach up to 10" over the tool rest. 


The Pro-Forme starter kit includes a handle, cutter head and a straight shaft.


The Pro-Forme Scraper Head is available as an additional accessory and is designed for normal or shear scraping to reduce the need for sanding. The Scraper Head replaces the Power Head on the shank that is best suited for the turning. Two scraper cutters are included with the scraper head.